Tascam RX-BT10MK2 Receiver

Professional Bluetooth Audio Receiver for Fixed and Mobile Setups

The Tascam RX-BT10MKII brings Bluetooth 5.1 Class 1 wireless audio into any professional installation, from classrooms and conference rooms to retail stores and touring rigs. With up to 100 m of unobstructed transmission range, this compact receiver pulls a stable signal from phones, tablets, and laptops without dropouts. Both balanced XLR and unbalanced RCA outputs are on board, so the unit drops into existing mixers, amplifiers, or active speakers with no rewiring required.

What Sets This Receiver Apart

Custom Bluetooth device naming is the headline feature: using the free TASCAM Bluetooth Name Editor software, each unit can be labelled "Conference Room 1" or "Hall A" so users connect to the right receiver instantly. The detachable antenna extends up to 20 m via cable, and the front-panel pairing button can be relocated through a Euroblock terminal — both critical for permanent installs where the receiver itself sits out of sight.

Wireless and Audio Performance

Bluetooth 5.1 Class 1 hardware streams with A2DP and AVRCP profiles and SBC plus AAC codec support. Audio performance is tuned for professional playback, with a flat response and high channel separation that preserves stereo imaging on the way into the mix.

• Bluetooth Version: 5.1, Class 1 — up to 100 m unobstructed range for large rooms and halls
• Supported Codecs: SBC, AAC — broad device compatibility across iOS and Android
• Frequency Response: 20 Hz – 20 kHz (+0.5 dB / –1 dB) — full-range audio without coloration
• Signal-to-Noise Ratio: ≥90 dB (A-weighted) — clean output for speech and music playback

Outputs and Connectivity

Both professional balanced and consumer unbalanced connections are provided, so the unit feeds directly into mixers, amplifiers, or powered speakers. A rear-panel stereo/mono switch gives installers routing flexibility for distributed audio layouts.

• Balanced Output: XLR (1: GND, 2: HOT, 3: COLD), max +14 dBu — long cable runs without noise pickup
• Unbalanced Output: RCA pin jacks, max +6 dBV — direct feed to consumer-grade amplifiers
• Output Modes: Switchable stereo / mono — adapts to single-zone or distributed speaker systems
• Pairing Memory: Up to 8 devices — quick reconnects for regular users

Physical Build and Power

The metal enclosure, mounting points on top and bottom, and included bracket kit make installation straightforward in furniture, racks, or ceiling cavities. Power comes from the supplied PS-M1524 AC adapter, which accepts 100–240 V mains for worldwide touring compatibility.

• Dimensions: 171 × 45 × 73 mm — slim profile fits behind consoles and under desks
• Weight: 530 g — light enough for mobile rigs, sturdy enough for fixed installs
• Power Supply: AC adapter PS-M1524, DC 15 V / 2.4 A — universal mains compatibility 100–240 V
• Power Consumption: 1.7 W — low draw for always-on installations