Kód produktu: DD-4820 | ID: 228011
Rackový systém pre spracovania signálov a manažment reproduktorov. Výkonná 96 kHz DSP riadiaca jednotka, štandardné analógové a digitálne vstupy a výstupy, dokonale bezpečný predný panel, to všetko dodáva potrebnú flexibilitu a kontrolu pri používaní či už v štúdiu alebo na koncertoch. Každý zo vstupov zahŕňa 31 pásmový grafický EQ, nasledovaný 9 pásmovým parametrickým EQ. Každý zo vstupov môže mať procesor prepojený s priľahlými kanálmi, ktoré majú následne prístup ku ktorémukoľvek výstupu. Na výstupovom bloku sa nachádza výber variabilných crossoverov, parametrický EQ, 2 insert sloty a delay s nastaviteľným časom. Advanced Feedback Suppression Wizard napomáha potláčať feedback s minimálnou zvukovou stratou pôvodného signálu. Možnosť uložiť až 50 presetov nastavení. Na prednom panely nenájdete žiadne ovládanie, vďaka čomu je maximálne bezpečný. Ovládanie je zabezpečené pomocou dodávaného programu System Architect Control. Súčasťou balenia je AC napájací kábel, nulový modem kábel, ethernetový kábel, CD-ROM s inštaláciou ovládacieho programu. Rozmery: 889 x 483 x 309 mm. Hmotnosť: 4,99 kg
Input | (4) total |
Input Connectors | Female XLR |
Input Type | Electronically balanced, RF filtered |
Insert Impedance | >50k ohm |
Max Input | Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu |
CMRR | >40 dB typical, >55 dB at 1 kHz |
Digital Inputs | (4) AES/EBU Channels |
Digital Input Connectors | Female XLR |
Digital Input Type | Transformer Isolated, RF filtered |
Digital Input Impedance | >110 ohms |
Mic Preamp Connector | (RTA) - (1) Female XLR |
Mic Preamp gain | (RTA) 10dB to 50dB in 10dB increments |
Output | 8 total |
Output Connectors | Male XLR |
Output Type | Electronically balanced, RF filtered |
Output Impedance | 30 ohms |
Max Output | Software selectable for: +24, +22, +20, +12, +8, +4 dBu |
Digital Output | (8) AES/EBU Channels |
Digital Output Connector | Male XLR |
Digital Output Type | Transformer Isolated, RF filtered |
Digital Output Impedance | >110 ohms |
A/D Converter | dbx Typve IV™ Converstion System |
A/D Dynamic Range | >114 dB unweighted, 116dB A-weighted |
Type IV Dynamic Range | 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW |
Sample Rate | 96kHz |
Wordlength | 24 bits |
D/A Dynamic Range | 112 dB unweighted, 115 dB A-weighted |
Dynamic Range | 112dB unweighted, 115dB A-weighted |
Internal Processing | 32 bit floating point |
THD+Noise | 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response | 20 Hz- 40 kHz, +/-0.5 dB |
Interchannel Crosstalk | <-85 dB at 1 kHz, 0 dB input gain |
Pre EQ Type | One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input |
EQ Gain | +/- 12dB |
Input Insert Processing | Two selectable Insert Processing blocks per input: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression |
Input Delay Length | Up to 682 mSec available |
Routing/Mixing | 4-input mixer available at each output allowing any input to be sent or mixed to any output |
Output Insert Processing | Two selectable Insert Processing blocks per output: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression |
Crossover | configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8 |
Crossover Filter Type | Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave |
Polarity | Positive and Negative |
Phase Control | 0 to -180 degrees in 5 degree increments |
Output Delay Length | 1365 mSec shared between the outputs |
Transformer | I/O: optional |
Controls | Ethernet, RS-232, Optional dbx ZC Wall Panels |
Power Consumption | 100V to 240V 50/60Hz, 45 Watts |
Dimensions | 3.5"x19"x12.15" |
Unit Weight | 11 lbs. |
Shipping Weight | 12.5 lbs. |
Parametre a špecifikácia
Napájanie
240V
Adaptér súčasťou balenia
Nie
Krajina pôvodu
Čína
Odporúčané príslušenstvo